●Outline Construction (Unit: mm)

             

                                 <20MPa                                                                                                                                               ≥20MPa  

              Options: pressure cushion

●Specification

Construction condition
Diaphragm material	SS 316L
Housing material	SS 316L
Pin Wire	Gold-plated karaf /100mm silicone rubber wire
Back pressure tube	SS 316L (gauge and negative pressure only)
Seal ring	Nitrile rubber
Electrical Condition
Power supply	≤2.0 mA
Impedance input	3kΩ-6 kΩ
Impedance output	3kΩ-6 kΩ
Response	(10%～90%)：<1ms
Insulation resistance	100MΩ，100V DC
Overpressure	2times FS, ( 0C/0B/0A/02 5times FS)
Environmental Condition
Media applicability	Fluid which has no corrosion on stainless steel and nitrile rubber
Shock	No change at 10gRMS，(20～2000)Hz
Impact	100g，11ms
Position effects	Deviate 90° from any direction, zero change≤±0.05%FS
Basic Condition
Environment temperature	（25±1）℃
Humidity	（50%±10%）RH
Atmospheric pressure	(86~106) kPa
Power supply	（1.5±0.0015）mA  DC
All tests are in accordance with relevant national standards, including GB / T2423-2008, GB / T8170-2008, GJB150.17A-2009, etc., and also comply with the Company's "Pressure Sensor Enterprise Standards" provisions of the relevant content.

●Recommended installation structure (unit: mm)

●Electrical connection

                             ≥20Kpa                                                                                                                                                                            ≤10Kpa

Parameter

Item	Min.	Typ.	Max.	Units
Linearity		±0.1	±0.2	%FS,BFSL
Repeatability		±0.05	±0.075	%FS
Hysteresis		±0.05	±0.075	%FS
Zero output			±2.0	mV DC
FS output	45	130		mV DC
Compensated temp. range	-10～80 （ 0A/0B/0C 0~70）			℃
Working temp. range	-40～125			℃
Storage temp. range	-55～150			℃
Zero temp. error		±0.75	±1.0	%FS, @25℃
Full temp. error		±0.75	±1.0	%FS, @ 25℃
Long term stability error		±0.1		%FS/year
Note：1. The above performance indicators are tested under the benchmark conditions       2. The temperature range for temperature drift test is the compensation temperature range